Taylor Swift

Well, I think I have to write about this girl, I was unconditionally and irrevocably in love with all of her songs. She very fantastic in her age, so wonderful. She wrote her own songs, play an instrument which is guitar, singing, acting, etc. What a talented girl! First time I heard her sing a song when she was singing with Miley Cyrus on Grammy, song title was Fifteen, and I just like it. She's the best song writer for live story, she can tell every details in her song. You can see about her details on http://www.taylorswift.com/





Here are some of her songs which I heard without boring :)

"Fifteen"

You take a deep breath and you walk through the doors

It's the morning of your very first day

You say "Hi" to your friends you ain't seen in a while

Try and stay out of everybody's way

It's your freshman year and you're gonna be here

For the next four years in this town

Hoping one of those senior boys will wink at you and say

"You know I haven't seen you around, before"

'cause when you're fifteen and somebody tells you they love you

You're gonna believe them

And when you're fifteen

Feeling like there nothing to figure out

Well count to ten, take it in

This is life before you know who you're gonna be

Fifteen

You sit in class next to a redhead named Abigail

And soon enough you're best friends

Laughing at the other girls who think they're so cool

We'll be out of here as soon as we can

And then you're on your very first date and hes got a car

And you're feeling like flying

And you're mommas waiting up and you think hes the one

And you're dancing round your room when the night ends

When the night ends

'cause when you're fifteen and somebody tells you they love you

You're gonna believe them

When you're fifteen and your first kiss

Makes your head spin round but

In your life you'll do things greater than dating the boy of the football team

But I didn't know it at fifteen

When all you wanted was to be wanted

Wish you could go back and tell yourself what you know now

Back then I swore I was gonna marry him someday

But I realized some bigger dreams of mine

And Abigail gave everything she had to a boy

Who changed his mind and we both cried

'cause when you're fifteen and somebody tells you they love you

You're gonna believe them

And when you're fifteen, don't forget to look before you fall

Ive found that time can heal most anything

And you just might find who you're supposed to be

I didn't know who I was supposed to be at fifteen

La la la la la .. la la la la la .. La la la la la

Your very first day

Take a deep breath girl

Take a deep breath as you walk through those doors. 

"Love Story"

We were both young, when I first saw you.

I close my eyes and the flashback starts-

I'm standing there, on a balcony in summer air.

I see the lights; see the party, the ball gowns.

I see you make your way through the crowd-

You say hello, little did I know...

That you were Romeo, you were throwing pebbles-

And my daddy said "stay away from Juliet"-

And I was crying on the staircase-

begging you, "Please don't go..."

And I said...

Romeo take me somewhere, we can be alone.

I'll be waiting; all there's left to do is run.

You'll be the prince and I'll be the princess,

It's a love story, baby, just say yes.

So I sneak out to the garden to see you.

We keep quiet, because we're dead if they knew-

So close your eyes... escape this town for a little while.

Oh, Oh.

Cause you were Romeo - I was a scarlet letter,

And my daddy said "stay away from Juliet" -

but you were everything to me-

I was begging you, "Please don't go"

And I said...

Romeo take me somewhere, we can be alone.

I'll be waiting; all there's left to do is run.

You'll be the prince and I'll be the princess.

It's a love story, baby, just say yes-

Romeo save me, they're trying to tell me how to feel.

This love is difficult, but it's real.

Don't be afraid, we'll make it out of this mess.

It's a love story, baby, just say yes.

Oh, Oh.

I got tired of waiting.

Wondering if you were ever coming around.

My faith in you was fading-

When I met you on the outskirts of town.

And I said...

Romeo save me, I've been feeling so alone.

I keep waiting, for you but you never come.

Is this in my head, I don't know what to think-

He knelt to the ground and pulled out a ring and said...

Marry me Juliet, you'll never have to be alone.

I love you, and that's all I really know.

I talked to your dad -- go pick out a white dress

It's a love story, baby just say... yes.

Oh, Oh, Oh, Oh, Oh.

'cause we were both young when I first saw you 

"Jump Then Fall"

I like the way you sound in the morning

We're on the phone and without a warning

I realize your laugh is the best sound 

I have ever heard

I like the way I can't keep my focus

I watch you talk, you didn't notice

I hear the words but all I can think is

We should be together

Every time you smile, I smile

And every time you shine, I'll shine for you

Whoa oh, I need you baby

Don't be afraid to

Jump then fall

Jump then fall into me

Be there, never gonna leave you

Say that you wanna be with me too

So I'm a stay through it all

So jump then fall

I like the way your hair falls in your face

You got the keys to me 

I love each freckle on your face, oh

I've never been so wrapped up, honey

I like the way you're everything I ever wanted

I had time to think it oh, over

And all I can say is come closer

Take a deep breath then jump then fall into me

Cause Every time you smile, I smile

And every time you shine, I'll shine for you

Whoa oh, I need you baby

Don't be afraid to

Jump then fall

Jump then fall into me

Be there, never gonna leave you

Say that you wanna be with me too

So I'm a stay through it all

So jump then fall

The bottom's gonna drop out from under our feet

I'll catch you, I'll catch you

And people say things that bring you to your knees

I'll catch you

The time is gonna come when you're so mad you could cry

But I'll hold you through the night until you smile

Whoa oh, I need you baby

Don't be afraid, please

Jump then fall

Jump then fall into me

Be there, never gonna leave you

Say that you wanna be with me too

So I'm a stay through it all

So jump then fall

Jump then fall baby

Jump then fall into me, into me

Every time you smile, I smile

And every time you shine, I shine

And every time you're here

Baby I'll show you, I'll show you

You can Jump then fall, jump then fall

Jump then fall into me, into me, yeah 

"Breathe"

I see your face in my mind as I drive away, 

Cause none of us thought it was gonna end that way. 

People are people, 

And sometimes we change our minds. 

But it's killing me to see you go after all this time. 

Mmm mmm mmm 

Mmm mmm mmm mmm mmm 

Mmm mmm mmm 

Mmm mmm mmm mmm mmm 

Music starts playin' like the end of a sad movie, 

It's the kinda ending you don't really wanna see. 

Cause it's tragedy and it'll only bring you down, 

Now I don't know what to be without you around. 

And we know it's never simple, 

Never easy. 

Never a clean break, noone here to save me. 

You're the only thing I know like the back of my hand, 

And I can't, 

Breathe, 

Without you, 

But I have to, 

Breathe, 

Without you, 

But I have to. 

Never wanted this, never wanna see you hurt. 

Every little bump in the road I tried to swerve. 

But people are people, 

And sometimes it doesn't work out, 

Nothing we say is gonna save us from the fall out. 

And we know it's never simple, 

Never easy. 

Never a clean break, no one here to save me. 

You're the only thing I know like the back of my hand, 

And I can't, 

Breathe, 

Without you, 

But I have to, 

Breathe, 

Without you, 

But I have to. 

It's two a.m. 

Feelin' like I just lost a friend. 

Hope you know it's not easy, 

Easy for me. 

It's two a.m. 

Feelin' like I just lost a friend. 

Hope you know this ain't easy, 

Easy for me. 

And we know it's never simple, 

Never easy. 

Never a clean break, noone here to save me. 

Ohhh 

I can't, 

Breathe, 

Without you, 

But I have to, 

Breathe, 

Without you, 

But I have to. 

Sorry (oh) Sorry (mmm) 

Sorry (eh eh) Sorry (mmm) 

Sorry (eh eh) Sorry (mmm) 

Sorry 

"Breathless"

Here you are now

Fresh from your war

Back from the edge of time

And all that you were

Stripped to the bone

I thought you' d want to know

That when you feel the world is crashing

All around your feet

Come running headlong into my arms

Breathless

I'll never judge you

I can only love you

Come now running headlong

Into my arms

Breathless

Lay down your guns

Too weak to run

Nothing can harm you here

Your precious heart

Broken and scarred

Somehow you made it through

I only ask that you won't go again

When you feel the world is crashing

All around your feet

Come running headlong into my arms

Breathless

I'll never judge you

I can only love you

Come now running headlong

Into my arms

Breathless

I'm so glad to see you smiling

So good to hear your laugh

I think that you've found you even

Missed yourself

I'm only asking this because I think that

Truth be told

Oh, you'll never go again

Again

When you feel the world is crashing

All around your feet

Come running headlong into my arms

Breathless

I'll never judge you

I can only love you

Come now running headlong

Into my arms

Breathless

Breathless 

"You Belong With Me"

You're on the phone

With your girlfriend

She's upset

She's going off about

Something that you said

'cause she doesn't get your humor

Like I do

I'm in the room

It's a typical Tuesday night

I'm listening to the kind of music

She doesn't like

She'll never know your story

Like I do

But she wears short skirts

I wear t-shirts

She's cheer captain

And I'm on the bleachers

Dreaming about the day

When you wake up and find

That what you're looking for

Has been here the whole time

If you could see

That I'm the one

Who understands you

Been here all along

So why can't you

See you belong with me

You belong with me.

Walking the streets

With you and your worn out jeans

I can't help thinking

This is how it ought to be

Laughing on a park bench

Thinking to myself

Hey, isn't this easy?

And you've got a smile

That could light up this whole town

I haven't seen it in awhile

Since she brought you down

You say you're fine

I know you better than that

Hey what you doing

With a girl like that

She wears high heels

I wear sneakers

She's cheer captain

I'm on the bleachers

Dreaming about the day

When you wake up and find

That what you're looking for

Has been here the whole time

If you could see

That I'm the one

Who understands you

Been here all along

So why can't you

See you belong with me

Standing by and

Waiting at your backdoor

All this time

How could you not know

Baby

You belong with me

You belong with me.

[Instrumental]

Oh, I remember

You driving to my house

In the middle of the night

I'm the one who makes you laugh

When you know you're about to cry

And I know your favorite songs

And you tell me about your dreams

Think I know where you belong

Think I know it's with me

Can't you see

That I'm the one

Who understands you

Been here all along

So why can't you see?

You belong with me.

Have you ever thought

Just maybe

You belong with me? 

"Today Was A Fairytale"

Today was a fairytale

You were the prince

I used to be a damsel in distress

You took me by the hand and you picked me up at six

Today was a fairytale

Today was a fairytale

Today was a fairytale

I wore a dress

You wore a dark grey t-shirt

You told me I was pretty

When I looked like a mess

Today was a fairytale

Time slows down

Whenever you're around

Can you feel this magic in the air?

It must have been the way you kissed me

Fell in love when I saw you standing there

It must have been the way

Today was a fairytale

It must have been the way

Today was a fairytale

Today was a fairytale

You've got a smile that takes me to another planet

Every move you make everything you say is right

Today was a fairytale

Today was a fairytale

All that I can say

Is now it's getting so much clearer

Nothing made sense until the time I saw your face

Today was a fairytale

Time slows down

Whenever you're around

But can you feel this magic in the air?

It must have been the way you kissed me

Fell in love when I saw you standing there

It must have been the way

Today was a fairytale

It must have been the way

Today was a fairytale

Time slows down

Whenever you're around

I can feel my heart

It's beating in my chest

Did you feel it?

I can't put this down

But can you feel this magic in the air?

It must have been the way you kissed me

Fell in love when I saw you standing there

It must have been the way

But can you feel this magic in the air?

It must have been the way you kissed me

Fell in love when I saw you standing there

It must have been the way

Today was a fairytale

It must have been the way

Today was a fairytale

Today was a fairytale 

"Tim McGraw"

He said the way my blue eyes shined

Put those Georgia stars to shame that night

I said: "That's a lie."

Just a boy in a Chevy truck

That had a tendency of gettin' stuck

On backroads at night

And I was right there beside him all summer long

And then the time we woke up to find that summer gone

But when you think Tim McGraw

I hope you think my favorite song

The one we danced to all night long

The moon like a spotlight on the lake

When you think happiness

I hope you think that little black dress

Think of my head on your chest

And my old faded blue jeans

When you think Tim McGraw

I hope you think of me

September saw a month of tears

And thankin' God that you weren't here

To see me like that

But in a box beneath my bed

Is a letter that you never read

From three summers back

It's hard not to find it all a little bitter sweet

And lookin' back on all of that, it's nice to believe

When you think Tim McGraw

I hope you think my favorite song

The one we danced to all night long

The moon like a spotlight on the lake

When you think happiness

I hope you think that little black dress

Think of my head on your chest

And my old faded blue jeans

When you think Tim McGraw

I hope you think of me

And I'm back for the first time since then

I'm standin' on your street

And there's a letter left on your doorstep

And the first thing that you'll read is:

When you think Tim McGraw

I hope you think my favorite song

Someday you'll turn your radio on

I hope it takes you back to that place

When you think happiness

I hope you think that little black dress

Think of my head on your chest

And my old faded blue jeans

When you think Tim McGraw

I hope you think of me

Oh, think of me

Mmmm

He said the way my blue eyes shine

Put those Georgia stars to shame that night

I said: "That's a lie" 

"White Horse"

Say you're sorry

That face of an angel

Comes out just when you need it to

As I paced back and forth all this time

Cause I honestly believed in you

Holding on

The days drag on

Stupid girl,

I should have known, I should have known

[Chorus]

I'm not a princess, this ain't a fairy tale

I'm not the one you'll sweep off her feet,

Lead her up the stairwell

This ain't Hollywood, this is a small town,

I was a dreamer before you went and let me down

Now it's too late for you

And your white horse, to come around

Baby I was naive,

Got lost in your eyes

And never really had a chance

My mistake, I didn't know to be in love

You had to fight to have the upper hand

I had so many dreams

About you and me

Happy endings

Now I know

[Chorus]

I'm not a princess, this ain't a fairy tale

I'm not the one you'll sweep off her feet,

Lead her up the stairwell

This ain't Hollywood, this is a small town,

I was a dreamer before you went and let me down

Now it's too late for you

And your white horse, to come around

And there you are on your knees,

Begging for forgiveness, begging for me

Just like I always wanted but I'm so sorry

Cause I'm not your princess, this ain't a fairytale

I'm gonna find someone someday who might actually treat me well

This is a big world, that was a small town

There in my rearview mirror disappearing now

And its too late for you and your white horse

Now its too late for you and your white horse, to catch me now

Oh, whoa, whoa, whoa

Try and catch me now

Oh, it's too late

To catch me now

Man On Fire

I think ManUtd fans and many people will agree with me if I call this man as Man On Fire. Since CR7 (now CR9) left United for Real Madrid, Wayne Rooney has become spearhead for United. He continually give his best performance in the field and until now become top scorer in Premier League. What a man! I hope he will always do the best and lead United to get the Premier League and Champions League titles this year, of course World Cup 2010 too. In United we trust :)  

Tanjung Pasir to Untung Jawa Island

Trip to Tanjung Pasir and Untung Jawa, 17 Oct 09. Biarkan gambar menceritakan :D

Kuis ANZ : Kami Bagian dari Dunia Anda

Horeeeee...hari ini dapat hadiah dari ANZ berupa speaker mini X-Mini, lucu banget bentuknya, mungil. Terima kasih ANZ! Sebenarnya sudah lupa kalau pernah ikutan kuis ini, tapi Januari yang lalu di telepon orang ANZ memberitahukan kalau g menang kuisnya.

Inilah pertanyaan kuis ANZ dan jawaban saya pada 30 November 2009

1. Q: Merepresentasikan apakah logo baru ANZ? A: We live in your world. Perwujudan ANZ akan sebuah Bank yang memfokuskan komitmen dan upaya dalam memberikan layanan yang terbaik bagi nasabah setia ANZ. Logo ANZ : Lotus merupakan lambang kesatuan dan pertumbuhan, sesuatu yang dengan mudah dapat dimengerti oleh nasabah-nasabah terlepas dari perbedaan bahasa maupun kultur. Tiga kelopak bunga tersebut melambangkan tiga wilayah Australia, Selandia Baru dan Asia Pasifik, dan di tengah kelopak yang membentuk rupa orang mewakili hal terpenting bagi ANZ, yaitu nasabah dan orang-orangnya.
2. Q: Bagi Anda, apa artinya Bank yang mengerti dan menjadi bagian dari dunia anda? A: Perbankan yang mengerti pentingnya waktu yang saya miliki, yang membuka akses serta menciptakan solusi yang menghubungkan saya dengan produk dan pelayanan yang tepat, dimana pun.

Terima kasih ANZ, semoga terus memberikan layanan yang baik bagi nasabahnya!

Happy Birthday Grandma...

Wah hari ini, nenek ku berulang tahun yang ke 88, happy birthday grandma :) , semoga terus diberi kesehatan sehingga nenek bisa terus melakukan aktifitas seperti biasanya. hmmm kapan yach kita ketemu lagi? kangen ma nenek. Selama ini aku baru ketemu nenek 3x :( , waktu kecil kalau ga salah tahun 1986, kemudian tahun 1997 dan yang terakhir tahun 2006. Dua pertemuan pertama nenek yang mengunjungi kami, sedangkan tahun 2006 kami sekeluarga yang mengunjungi nenek :). Semoga terus diberi umur panjang karena jika nenek mencapai umur 90 kami sudah berjanji akan mengunjungi nenek lagi, hmmmmmmm jauhnya kampung mu nek....can't wait...love you grandma...

Remember Our Manna

My family name is Manna :D. Earlier times, it's called bread from Heaven. (When the Israelites saw it, they said to each other, "What is it?" For they did not know what it was. Moses said to them, "It is the bread the LORD has given you to eat. --- Exodus 16:15). As what God has done for Israelites, give them food in the wilderness, I hope I can be salt and light to the world. Help me Lord!

----------------------------------------------------------------------

Hereby article taken from http://ymiblogging.org/2010/02/remember-our-manna/

We’ve been gone from South Carolina only for a year, but our boys have already begun to forget. A couple of weeks ago, we took a trip to our old town. We drove through our neighborhood and saw the steep hill where they rode their bikes, screaming all the way down. We saw the spot where we always stopped on our springtime walks to snag honeysuckle. The boys, wide-eyed, kept saying, “Oh, I remember! I remember that!”


I believe remembering is one of the most important things we do as humans. In order to remember who we are, we need to remember where we’ve come from and what we’ve experienced up to now.


For Israel, their national identity was replete with stories of how their God had delivered and rescued and provided (and, yes, judged). The Exodus narrative tells how God pried Pharaoh’s hand free from His people and walked them out of Egypt. God opened up the sea, led His people with a fiery pillar (Exodus 14) and turned bitter water sweet (Exodus 15). And, perhaps most astonishingly, “rain[ed] down food from heaven” (16:4). They called it manna.


Despite God’s miraculous intervention, the people often doubted whether God would provide what they needed. When the people were hungry, they complained. And so God graciously sent them food—food that would fall from the sky. Every day, they had all they needed (v.12).


God insisted, however, that they save some manna as part of their holy items. He was concerned that future generations would forget what had been provided. When their grandchildren would ask about what the strange wafers were in the jar, they could say with gratitude and hope, “Ah, I remember.” 


—Winn Collier

Gara-Gara Bau Badan, Diusir dari Pesawat

Pagi-pagi g udah baca berita ini aja :D, tega nian para penumpangnya hahahaha, tapi kalau emang baunya sangat mengganggu, mau gimana lagi yach.....

---------------------------------------------------------

Liputan6.com, New York: Bagi Anda yang memiliki potensi bau badan berlebih sebaiknya berhati-hati dan menggunakan minyak wangi sebelum bepergian. Karena seorang penumpang di maskapai penerbangan Jazz Air asal Kanada, diusir hanya lantaran keluhan seluruh penumpang pesawat yang mencium bau badan menyengat. Demikian dirilis CNN, Kamis (18/2).

Penumpang wanita duduk dekat dengan penumpang pria "bau" itu mengungkapkan, seluruh penumpang pesawat hanya bergumam dan menatap ke arah pria sumber bau tidak sedap tersebut. Wanita yang tidak mau disebutkan jati dirinya itu menggambarkan situasi pesawat sangat tidak nyaman. Bahkan, penumpang lain menyebutkan bau yang ditimbulkan sangat "brutal". Penumpang berbau badan menyengat itu akhirnya diminta turun oleh awak pesawat.

Juru bicara maskapai penerbangan Air Jazz, Manon Stuart, membenarkan penumpang tersebut turun dari pesawat sebelum lepas landas. Namun, Stuart tidak memberikan informasi secara spesifik mengenai alasan dan perintah penumpang tersebut diminta meninggalkan pesawat karena menyangkut masalah privasi.

Stuart menambahkan, sebenarnya maskapai Air Jazz sama seperti perusahaan maskapai lain, yakni tak mempunyai kebijakan tertentu mengenai bau badan. Namun, dalam keadaan "darurat" itu, menurut Stuart, para awak akan bertindak demi kepentingan keamanan dan kenyamanan yang terbaik bagi mayoritas penumpang.

Insiden penurunan penumpang secara paksa bukan pertama kali di Amerika Serikat. Sutradara dan produser film Holywood, Kevin Smith, mengeluh dalam Twitter-nya, Ahad lalu. Ia dipaksa turun oleh pilot maskapai Southwest Airline lantaran "terlalu gemuk".(ANS)

*Taken from:

http://id.news.yahoo.com/lptn/20100219/twl-gara-gara-bau-badan-diusir-dari-pesa-deaf2f6.html

KABA (KBS) - Knowledge Base

Finally, KABA released Knowledge Base on website, it is very helpful for support team :)

Hereby the content:

In this area you find questions and answers on technical issues as well as solution hints about technical problems, i.e.:

• General
• Communication
• Time and Attendance
• Access Control
• Shop floor data collection
• Biometrics

"GENERAL"

How is the memory extension identifiable for BECO-based terminals? 

Check in sop.ini whether the memory extension is enabled. 

A Mifare reader does not work after the authentication or does not show any reaction to the 

Remedy: Repeat the authentication.

1: Switch the terminal on and wait for 2-3 seconds.

2: Hold the configuration badge in front of the reader for 10 seconds. 

taufe = authentication 

Existing barcode badges were read on Bedas barcode swipe readers without any problems. The new serial barcode swipe readers, however, do not read these present badges. 

Remedy: Improve the optical properties of the reader.

1: For IR barcode swipe readers: Clean the cover glass in the reader.

2: Have the contrast in the reader module readjusted at Kaba.

3: Replace the reader if necessary. 

Communication problems with different Bedas, Bedanet and B-Net device types mixed in one operation via host party line. 

Remedy:

Check whether one of the host party line LEDs lights permanently (incorrect connection). Observe the connection names. Probably exchange the A and B line on the B-Net terminals. 

How can a BECO-based terminal be configured remotely? 

Procedure:

1: Store the "EEPromSettings" file from the directory "RAM" via FTP.

2: Edit this file, i.e. adapt the IP addresses etc.

3: Enter the RESET command in the first line of the file.

4: Save the file as "reboot cmd".

5: Copy this file in the "RAM/Transfer" directory. 

The terminal application no longer starts after a memory extension was executed (that means the software licence "sop.ini" has been renewed). The terminals displays "Please wait…" for a longer period and then "Kaba GmbH". 

Possible cause: The whole memory has to be repartitioned after a memory extension. This requires a cold start. 

Remedy: Perform cold start 

Terminal is connected to a router. The establishment of a network communication to this terminal is not possible.  

Problem with autosensing

If two network terminals support the function "Autosensing" it may happen that the communication cannot be established. A different timing with the autosensing can be the reason for this.

Remedy: Set fixed transmission parameters for one of the components. It is basically better to do this setting on the router. For Kaba PC-terminals this setting can also be done on the terminal. 

Procedure:

1: Click "Start" "Settings" "Network and Dial Up Connections" or "Network Connections"

    "Local Area Connection".

2: Click the right mouse button on "Properties" "Configure" "Advanced".

3: Select "Property" and then click "Link Speed/Duplex Mode".

4: Enter the desired mode (10 Full mode, 10 Half mode, 100 Full mode, 100

    Half mode) under value.

5: Save and finish. 

Remark

Other Kaba terminals (BECO-based terminals) do not allow these changes on the terminal! In this case, do the setting on the router. 

The complete serial number for a Mifare or Hitag data carrier is to be checked for ID number. This number, however, has more than 7 digits. What is to be done? 

Adapt the ID length in the terminal:

The ID length and the PIN length can be adjusted for terminals of the B-Net series. For doing this, the file /Program/-B-Clientxxx/Init/b-client_xxx.ini must be adapted as follows: 

[MasterRecordDefinition]

IDLength = 7 // possible values: 0...18

PINLength = 4 // possible values: 0...1 

Remark

As the master record structure depends on this setting, any change on the ID number or PIN length must be agreed with the software partner. 

Connect datalogic barcode hand scanner to the Bedas terminal. 

The datalogic barcode hand scanner (e.g. DLC6090-M1, Touch90 or Dragon D101) is to be connected to a "Bedas" terminal as a replacement reader. For the Bedas terminal the reader is connected via the (pen-compatible) PEN interface. For the operation the serial interface must be set in the barcode hand scanner. 

After a warm start the terminal starts with the wrong parameterization, the terminal application is not started, "Kaba GmbH" is being displayed. 

Possible cause: Lithium battery is empty (if provided).

Please check the voltage of the lithium battery. If the value is below 3.6 V, replace the battery. 

If a rolling data input is set under a single function block (keyboard or reader input), it is not necessary to enter all the digits. The data record has preceding digits. Why are sometimes zeros and sometimes blanks preceded in the data record? 

The type of preceding zeros is defined by the type of data input.

- If the input data in the single function block are set as numerical data, the zeros are preceded.

- If the input data in the single function block are set as alphanumerical data, the blanks are preceded. 

Special characters like "Ö", "Ü" and "Ä" are displayed without any problems if the terminal connection is realized via Ethernet but not without problems via the party line. 

Cause: The different bit width of the communication. 

1: For UDP or FTP transmission via Ethernet:

In case of an UDP or FTP transmission of texts 8 bits maximum are available for each character. This 8-bit transfer allows special characters of the extended ASCII range (80hex to Ffhex) to be transmitted. If e.g. umlaut vowels like "ö" are transmitted directly, no conversion by means of a parameterized character set identification is necessary.

2: Serial RS-485 transmission:

In case of an RS485 host communication (BPA/9) only the 7-bit characters are transmitted as text (conditional upon the protocol). The characters beyond (80hex to Ffhex) cannot be transmitted directly.

A conversion by character set identification is necessary then.

If Bedas-compatible texts or only one language is used, it will do to set the character set identification with an X07-set to German.

Parameter record:

>3X070002

If a customer wants to operate several terminals with an RS-485 host communication and wants to use several languages on one terminal, a character set identification can be set in the file /Program/B-Client_xxx/Init/b-client_xxx.ini for every language. 

Content of the file /Program/B-Client_xxx/Init/b-client_xxx.ini:

Language0 = de

Language0Text = Deutsch

Language0Characterset = 002

Language1 = fr

Language1Text = Français

Language1Characterset = 001 

Example for the representation of umlaut vowels with German character set.

The display info text  "Überstunden" is to be displayed on the terminal. For this, the code 002 (German) is set in the terminal by using the download set X07 "Character set code"

The character "]" has to be taken from the character set table for code 002 at 

The text "]berstunden" is then entered in the download set for the display info text with the block code IO3. After conversion with the character set table "Überstunden" is then displayed on the terminal. 

Kaba terminals are to be embedded in the customer network. Which ports and protocols are used for the communication with the B-Net or Bedanet terminals? 

The UDP protocol is used for the data communication/data transfer between terminal and communication computer. The setting of the UDP port in the terminal as well as in the communication program must match.

This UDP port is within a range of 30464 dec (7700 hex) and 30703 dec (77EF hex). 

The following protocols / ports are used for the communication/set-up

- Configuration by browser: http–protocol on the default port 80 (dec.)

- Configuration/data transfer via FTP: ftp–protocol on the default port 21 (dec.)

"COMMUNICATION"

The B-COMM server cannot be started any longer after a restart under WIN XP. 

Possible cause: WINDOWS used the set RMI port (default 1099) for another application during the booting process. 

Remedy:

Add "rmi1099/tcp #RMI for B-COMM JAVA" in the file C:\WINDOWS\system32\drivers\etc\services 

Context menu displays of Termstat are only deleted temporarily 

The context menu of "Termstat" shows error messages which occurred. But the function "Delete warnings caused by data records" deletes these messages only temporarily. The old error messages are displayed again after Termstat was closed and restarted.

Remedy:

This is no error because all errors are displayed during the current runtime of the IO. The old error messages can be deleted temporarily from the history after elimination of the malfunction. So a repeated malfunction is identified immediately. In order to delete fault messages permanently, the IO channel must be closed. 

The logged-in user has no connection to the server. 

Configuration:

B-COMM server is installed on a Windows server 2003 by using the method "Separate". B COMM GUI is installed on a remote computer. 

Possible cause:

The installation has been done under another user name and the B-COMM Java directory is in a user directory.

Remedy:

1. Log in with the user name under which the installation was made.

2. Assign administrator rights to the user concerned for the B-COMM installation directory. 

Booking file cannot be re-routed to a mapped drive 

Example:  \\device name\folder on drive Y:\

Only drive C: can be selected in the “Configure client” menu. 

Possible cause:

The current user is not authorized to select mapped drives. 

Remedy:

The rights for B-COMM Java are assigned in the file java.policy.

It is to be found in the folder C:\Documents and Settings\ 

Can an existing B-COMM WIN 32 configuration be transferred to B-COMM JAVA? 

Yes. 

Transferring a B-COMM WIN 32 configuration (clients, channels, terminals) to B‑COMM JAVA is possible if no clients or channels have been added in B-COMM Java yet. For further information, see B-COMM Java manual, chapter 4.3.4.13. 

Where is the parameter editor in B-COMM JAVA to be found? 

Remedy:

B-COMM JAVA has no own parameter editor. But it is possible to use the parameter editor of B-COMM WIN32. The prerequisite for this is that the parameter editor of B-COMM WIN32 is installed and licensed. 

B-COMM JAVA takes more and more time for starting and is closed intermittently without any reason. 

Possible cause:

The order file became too large. 

Remedy:

Reorganize the order file or delete the finished jobs. For further information, see B-COMM Java manual, chapter 4.3.5.26. 

More than 30 device addresses (GID) are required. 

Method 1:

Several clients can be added. 30 GID can be assigned to each client. The clients can be named accordingly for a better overview. For further information, see B-COMM Java manual, chapter 4.3.4.3. 

Example:

Basement2, Basement1, ground floor,

Floor 1, Floor 2, Floor 3

House 1, House 2, House 3 etc. 

Method 2:

Several servers can be installed. Access to these servers then takes place via a GUI. The IP address and the respective port for each server are then defined in the GUI start call.

This could be solved e.g. by means of one batch file per server.

Example:

1. Batch file:

 javaw –Djava.security.policy==bcommjava.policy –cp bcommgui.jar benzing.bcommgui..BCOMMGUI –i -p

2. Batch file:

javaw –Djava.security.policy==bcommjava.policy –cp bcommgui.jar benzing.bcommgui..BCOMMGUI –i -p etc. 

The B-COMM Java GUI cannot be started. 

Remedy:

Load the bcommgui.bat in the DOS command window. An exception is possibly displayed here which delivers information about the start problem.

In case of doubts, this exception can be sent to the KABA hotline for analysis. 

The B-COMM server cannot be started as a service. 

Remedy:

Load the bcommserver.bat in the DOS command window. An exception is possibly displayed here which delivers information about the start problem. In case of doubts, this exception can be sent to the KABA hotline for analysis. 

The B-COMM server cannot be started as a service via the B-COMM Java service manager after the installation. 

Remedy:

Enter the password once again in the Windows service manager.

Path: Start/Settings/System control/Management/Services.

Double click on the service B-COMM server or open the tab "Log in" via the context menu /Properties. The password can be entered here. 

No user data communication possible although the licence file was entered correctly / copied into the B-COMM JAVA directory. 

Remedy:

Restart the B-COMM server after having entered the licence data. 

A job is set permanently to RUN and cannot be closed. 

Remedy:

Restart the server. 

Which B-COMM server and B-COMM GUI can communicate with each other? 

Explanation:

B-COMM server and B-COMM GUI can communicate with each if

1: The version of the B-COMM server is newer than the version of the B-COMM GUI

2: The GUI version can be newer than the B-COMM server version. Prerequisite: the B-COMM GUI does not use any function a B-COMM server with the same version would show. 

Why there is no cinohost.x file for B-COMM Java available? 

Explanation:

This function was needed only under B-COMM WIN32. Here data records were acknowledged from the terminal with ACK and then deleted in the terminal. If problems occurred while the data record was re-routed to the cal interface, the data record had to be stored in the intermediate storage to avoid data loss. 

But B-COMM Java does not acknowledge the receipt of the data record but sends it to the partner software. The data record is not deleted in the terminal unless the partner software acknowledged the receipt with ACK. This guarantees that data records which could not be transferred to the partner software are not deleted from the terminal. 

Once a day a time record is sent to all the terminals by using time-controlled jobs. How can be checked whether all terminals received this data record? 

As the time record is sent to each terminal, each terminal has to acknowledge this time record with ACK.

If the time record cannot be received from a terminal and is not acknowledged, the job is closed with error. For further information, see B-COMM Java manual, chapter 4.3.5.2. 

Communication problems under B-COMM Java. How can I isolate the problem? 

Remedy:

Change the debug level to "Terminal RAWDATA" on the respective channel. By doing this, the UDP data packages communicated between B-COMM Java and the terminal are output. For further information, see B-COMM Java manual, chapter 7 and 7.1. 

More information is possibly contained in the following files:

\\Debug\*.debug, \\bclan.ini, \\bcser.ini 

If necessary, send in these files for analysis to the B-COMM hotline. 

What can I do in case of problems with the partner application? 

Remedy: 

Information is possible to be found in the wrapper_helper.log, wrapper_io.log, und wrapper_server.log.

If necessary, send in these files for analysis to the B-COMM hotline. 

How can I find out which B-COMM Java type is installed? 

Remedy:

The installation type is entered in the \B-COMM Java\install.ini:

1. InstallType=Common

2. InstallType=Separate 

Does software which is not written in Java allow an access to B-COMM Java? 

Remedy:

Yes. Software which is not written in Java requires the BCOMMHelper.

For further information, see B-COMM Java manual, chapter 9.6 

Is a changeover from B-COMM WIN32 to B-COMM Java also possible with terminals of previous series (Bedas and Bedanet)? 

Remedy:

Yes. All the KABA terminal series can be linked to B-COMM Java. B-COMM Java replaces B-COMM WIN32. As in B-COMM WIN32 the communication is done via the BPA protocol. A serial communication is possible as well as an Ethernet communication.

"TIME AND ATTENDANCE"

B-Net 93 20/40/60: Reading error on the display after badge entry. 

Possible cause: Badges are used which do not comply with Kaba standards. 

Remedy: Adapt the file "system.ini" (see corresponding application manual) 

B-Net 93 20/40/60: No communication via party line with 4,800 baud. 

Only 9,600 and 19,200 baud are supported. 

B-Net 93 20/40/60 with CBM module: While reading in the templates the message "No FTCS connection" is displayed. 

1: Operate the terminal in standalone mode. (Parameter Standalone=1 in section [Reader1CBM] in

    the "system.ini" file).

2: Start the FTCS service. 

BECO-based terminals with CBM module: FTCS service is started, FTCS IP address in service mode is set. Nevertheless the terminal cannot be logged in BioGUI. 

Check via FTP in the system.ini file whether the terminal has been activated for the standalone mode. Standalone mode must be deactivated. (Parameter Standalone=0 in section [Reader1CBM] in the "system.ini" file). 

IP address not known for BECO-based terminals. 

1: Check the settings in service mode.

2: Reset IP address to 123.0.0.2 (default) by using the service button (keep it pressed for 12 sec. after the 2: switch-on). 

No access and polling to the subterminals in spite of correct parameterization and correct sop.ini. 

- Check whether a BEX302 (optional interface) exists.

- Check the wiring.

- Exchange the A and B lines 

BECO-based terminals with the CardLink option: Writing on the badge is not possible.

Causes:

1. Authentication of the reader with SAM63 was not successfully.

Remedy: Do the authentication again 

2. No corresponding segment on the badge 

Remedy: Add the segment.  

BECO-based terminals: Number of data records to be managed havened from 200 to 100. 

Check whether the option "CardLink" is activated in the sop.ini. With activation of the option CardLink" the number of enabled master records is havened. 

BECO-based terminals B-Net 93 20/40/60 with connected subterminals: How can the internal relay of the control be addressed? 

The new relay concept in the B-Net series does not allow the internal relay in the control to be operated.

"ACCESS CONTROL"

Terminal starts with the error message "Kaba GmbH" 

Save the data directory via FTP. Search for error message in the files degub.log and debug.err. Alternatively, the error message can also be looked up in the service mode.

"SHOP FLOOR DATA COLLECTION"

Terminal starts with the error message "Kaba GmbH". 

Save the data directory via FTP. Search for error message in the files degub.log and debug.err. Alternatively, the error message can also be looked up in the service mode. 

Datalogic barcode hand scanner does not react or reacts incorrectly on a Bedanet or B-Net–terminal. 

The datalogic barcode hand scanner (e.g. DLC6090-M1, Touch90 or Dragon D101) is connected serially to a B-Net PDC terminal (e.g. B-Net 95 20 / 40 / 60 / 80). It does not react on barcode inputs or the scanned barcode data do not reach the application.

Possible cause: Wrong interface is set in the barcode hand scanner. 

The barcode hand scanner has several different interfaces. The wrong interface is probably set. For the operation on the B-Net/Bedanet terminals the serial interface must be set. 

The parameterisation was transferred from an existing B-Net 95 80 to another terminal. The application is now displayed incorrectly on the new terminal. 

Check the display resolution of the two terminals (800x600, 1024x768 or 1280x1024). Send the parameterisation without Z sentences (ini inputs), because the coordinates of the function keys and the entire display are contained in the Z-sentences. 

A BDE terminal is logged in offline mode. After a booking, the logic booking response (e.g. Thank you") is not displayed within the time which is defined in the parameter "Authorized display time" but in a shorter time. 

Cause: Activated key repeat function 

Remedy:

Deactivate the function "Key repeat" in the parameterization of the function keys if not to be used.

Description of the key repeat function:

After the booking, the terminal returns to its basic state. If another booking is to be carried out with the same function key, this function key must be pressed again. Function keys for which the “Key repeat function” parameter has been set allow a booking without pressing that key again. 

The B-Net 95 40 can store up to 2000 master records/8000 posting by default. What is needed or what is to be done if more than 8000 master records are to be stored? 

Solution 1: Adaption of the INI files (up to 3500 master records maximum) 

For the new terminals it is possible to redivide the standard memory configuration (2000 master records/8000 bookings). In this case, 3500 master records/3000 bookings can be stored.

For doing this, the file /Program/-B-Clientxxx/Init/b-client_PDC3.ini must be adapted as follows:

[Buffers]

MasterRecordBookingBufferConfiguration=2

Possible values:

1 (default) for 2000 master records and 8000 bookings.

2 for 3500 master records and 3000 bookings.

Changing or extending the memory arrangement requires a cold start. Please consider that a data backup possibly has to be done before the cold start. 

Solution 2: Extension of the memory (up to 10,000 master records maximum) 

For this case, the memory extension 10,000/50,000 (article no. 04077338) is required. It consists of the following two components:

- Hardware memory (BEX400 memory extension 4MB SRAM)

- Software licence (a file named "sop.ini").

The sop.ini has to be copied via FTP (in ASCII mode) into the directory /Program/Share/Init of the terminal. 

Changing or extending the memory arrangement requires a cold start. Please consider that a data backup possibly has to be done before the cold start.

NOTICE:

In order to allow the software licence (sop.ini) to be issued and sent to you we need the MAC address. Please give us the MAC address of the terminal concerned on the order for the memory extension. 

Master record problem on a B-Net 95 40 with B-Client PDC3. 

Error description:

- A master record upload of an individual master record delivers the master record of another ID.

- A master record upload of all master records delivers some IDs multiple times repeatedly.

- User report on wrong displays, e.g. wrong balances, info texts or wrong profiles or authorizations.

- Individual master records cannot be deleted.

- The default authorizations are incorrect after a master record download with wildcards.

Remedy: Firmware Update

Please update the firmware with the current version. You can download the update from the Kaba internet portal under https://portal.kaba.biz/pps/portal/ in the sector "Downloads". 

B-Net 95 80 with B-Client 5 Kiosk or browser call: Pressing of a function key shows a gray display. The application is in a loop and not operable. 

Install the current version of the B-Client Kiosk 5. Restart the application. 

How many display infos are shown in parallel for a B-Net 95 40? How can this value be changed? 

Normally, 4 display infos are displayed in parallel. 

This value can be changed with entries in the file /Program/-B-Clientxxx/Init/b-client_PDC3.ini: 

[SurfaceDesign]

DisplayInfoVisibleNumber = 4 

The parameter "DisplayInfoVisibleNumber" defines the number of displays visible at the same time. Any number can be entered. For reasons of space, the information to be displayed as well (e.g. user-related plain text, etc.) must be taken into account. 

For a B-Net 95 20, the relays are not activated. 

Solution: The software option "Digital contacts" is needed. 

Normally, the B-Net 95 20 is delivered without support of relays and inputs. Should these components be used, order the software option "Digital contacts".

The sop.ini has to be copied via FTP (in ASCII mode) into the directory /Program/Share/Init of the terminal.

NOTICE:

In order to allow the software licence (sop.ini) to be issued and sent to you we need the MAC address. Please give us the MAC address of the terminal concerned on the order for the software option. 

The background illumination of the display of a BECO-based terminal (B-Net 95 20 / 40 / 60) goes off after a certain time. Can this be deactivated? 

Yes!

The background illumination is turned off after 10 minutes in case that there is no action on the terminal (=no booking). This value is set in the INI file. Time periods in which no switch-off takes place can be stored here in addition to these switch-off times. At total of 5 time pairs can be stored. This is done in the file Program/Share/Init .

[Display]

ActiveTime = 600

ActivePeriod0 =

ActivePeriod1 =

ActivePeriod2 =

ActivePeriod3 =

ActivePeriod4 = 

If e.g. the background illumination shall not be switched off between 8 a.m. and 5 p.m., the following must be entered in the section [Display]:

[Display]

ActiveTime = 600

ActivePeriod0 = 08:00 17:00 

Additional information:

The parameter "ActiveTime" defines the time until background illumination is switched off. The entry takes place in seconds. Allowed entries are 0 and times greater than 600 seconds. With 0 the background-illumination is switched-off permanently if no time period with the parameters "ActivePeriodX" has been set. Re-starting the background-illumination is carried out with touching a button or with a booking. 

"ActivePeriod0" to "ActivePeriod4" define time periods, in which the display, independent from the parameter "ActiveTime", is permanently active. The specifications are in time pairs (meticulous). 

Times are defined by hour, minute and second; minute and second are optional. Hour, minute, and second are separated by colons or periods. Two time periods are separated by blanks. 

Which barcode types do the Kaba BDE terminals scan? 

On delivery (as a standard) the following barcode types are scanned:

EAN 8 / EAN 13 / UPC A / UPC E

Interleaved 2/5

Standard Code 39

Code 128 Code 39

Code 128 

Additional information:

It is possible to set up the barcode manual scanner in a way that additional barcodes (e.g. Codabar, Code 93, Code EAN 128 etc.) can be read. If your customer-specific barcode is not read, you can send it in by fax (+49 7720/603-238) or better by e-mail () to Kaba Produktservice for analysis. We check whether this barcode type can be set. 

The terminal application (PDC1 / PDC 2 / PDC3) cannot be started after the terminal was configured in the service mode. The terminals displays "Please wait…" for a longer period and then "Kaba GmbH". 

Possible causes:

1. A serial interface (e.g. COM1) was assigned twice, e.g. to the second scanner and to the host line.

Remedy: Start the terminal in service mode. Check the settings and correct wrong values.

2. The terminal IP address and the host IP address are in different network areas. No gateway is entered. The terminal thus recognizes that the communication cannot be established and does not start the application.

Remedy: Start the terminal in service mode. Check the settings and correct wrong values. 

Additional information:

1. From this "Kaba GmbH" mode the terminal can also be started remotely in service mode. For doing this, open the FTP connection to the terminal (user: root Password: Bedanet).

Transfer the file "reboot.cmd" with the content "SERVICE" to the directory "/Ram/Transfer."

2. If you cannot find out the reason for the problem, check the files debug.err or debug.log in directory /Data/B-Clientxxx/Diagnosis/.

If necessary, send in these files for analysis to the Kaba hotline.

"BIOMETRICS"

Terminal displays a reading error. 

First step: Find out when the message occurs.

1: After actuation of a function key; the CBM module remains inactive. 

Remedy:

The installation is probably faulty or incomplete. Implement the terminal correctly in the installation and do a template update. 

2: When putting on a finger; the CBM is activated. 

Possible causes: 

The template ID is not adapted to the system.

Finger was not exactly identified from CBM.

Person is not taught in. 

Remedy: 

Check the badge definition, template ID, bookingPreset and the prefix.

Wipe the finger and put on again (see graphics for user guidance)

Teach in the person. 

Additional information:

For teaching in a person use the enrolment station MSO 300 if possible. Here, the quality of the template is made visible by means of symbols. Poor templates are identified and can be taught in again. 

The identification of the templates on the terminal can be handicapped by other factors such as

- Dry finger

- Fissured finger

- Poor minutia or slight pressure

- Injured finger

In case of an error check these factors as well. 

Stored templates are not sent to a newly added terminal. 

Possible cause: 

Network connection to the management software is missing (can be checked with the call "Local enrolment"). If local enrolment is possible, then the network connection is established).

Remedy:

Check all network settings, probably also gateway and subnet mask. 

Possible cause:

Missing or faulty FTCS connection (can be checked with the call "Local enrolment"). If local enrolment is possible, then the FTCS connection is established).

Remedy:

Check the settings for FTCS. FTCS IP address and FTCS UDP port.

Possible cause:

The templates are not released for this group of terminals.

Remedy:

Check in the management software. 

Possible cause:

The wrong reading module was chosen when adding the terminal in the management software.

Remedy:

Check in the management software. 

Not all the templates are sent to a newly added terminal. 

First step: Check whether the number of existing templates exceeds 500.

Possible cause:

A CBM module with unsuitable database size was build in.

Remedy:

Use a module of the necessary size. Possible module sizes: 500, 3,000 and 5,000 persons. 

Possible cause:

The necessary database size has not to be licensed in the sop.ini.

Remedy:

Check the database size by calling the "Local enrolment". Acquire the necessary licence, if necessary. 

Possible cause:

The firmware of the terminal is not up-to-date.

Remedy:

Check the firmware of the terminal and update, if necessary. The following firmware versions are necessary:

- B-Net 91 20FP >863-00-X-K00.

- B-Net 93 20  >751-00-X-K06.

- B-Net 93 40  >752-00-X-K07.

- B-Net 93 60  >753-00-X-K08. 

Newly added template is not identified for booking. 

First step: Check whether the log file in the management software contains any information on problems. 

Possible cause:

Conflict with another ID or person has already been taught in with another ID.

Remedy:

Check the ID numbers in the database. Delete redundant ID. Teach in the person again, if necessary. 

Possible cause:

Group number not assigned or assigned incorrectly.

Remedy:

Check in the template management whether the template is assigned to the right group.

Taken from :

http://www.kaba.com/workforce-management/en/Sales-Support/Knowledge-base/195016_195016/knowledge-base.html